In the process of boiler combustion, the air required for combustion must be continuously sent into the furnace and the combustion pro...

【More】

1, the expansion joint can not bear the weight should be hoisted separately. The expansion joint shall not be hoisted together with the pipe...

【More】

) to determine whether expansion joints are required for pipe sections.
 
1. We know that. One is the equipment parameters (provided ...

【More】

 The formula involved in the selection of bellows expansion joint
 
(1) thermal displacement at the interface of the equipment. ...

【More】

 When the pipe is pressed and heated, it will produce certain deformation, so the pipe design needs to improve its flexibility, and the...

【More】

 Now there are two commonly used installation locations in my design. First, the water pump inlet and outlet directly set the connector...

【More】

The selection of z-section expansion joints is the same as that of l-section expansion joints. When pipeline deformation is allowed,
 ...

【More】

 In ∏ shape section, expansion joint selection generally USES symmetric arrangement, an arrangement, as shown in figure 2 in the g...

【More】

Expansion joint selection goal is to choose a reasonable expansion joint type and arrangement, make its biggest compensation ability, or whe...

【More】

 As a thermal compensation device, bellows expansion section can be compensation pipeline thermal deformation, the mechanical displacem...

【More】

Thermal compensators are widely used in thermal departments due to their reliable operation, good performance and compact structure. From th...

【More】

1/ expansion joint position setting problem
 
 
 
When an expansion joint is added to a fixed tube-plate heat exchanger s...

【More】